PRODUCTS
Menu
1866- High Leverage Long Nose Plier
1866- High Leverage Long Nose Plier (American Style)
- 1866 High-Leverage Long Nose Plier
- 1866 高倍力長嘴鉗
- 1866 高倍力尖嘴钳
- 1866 Alicate de Punta Larga de Alto Palanca
- 1866 Hochhebel-Spitzzange
- 1866 Pince Long Nez à Haut Levier
- 1866 كماشة أنف طويلة عالية الرافعة
- 1866 คีมปากแหลม แรงงัดสูง
- Handle Introduction- (Plier, Torque Wrench/ Wrench)
1866 is a high-leverage long nose plier for precise reach and control in confined spaces. Slim, tapered jaws access harnesses and panels; induction-hardened cutters and cross-hatched grips handle wire prep and small-part work. Non-slip handles maintain control in oily conditions.
| 1866 | L mm/inch | L3 mm | W3 mm | W4 mm | T1 mm | T2 mm |  g |  pcs |
|---|---|---|---|---|---|---|---|---|
| 5 | 140/ 5-1/2" | 40.8 | 14.8 | 3.2 | 10.2 | 2.4 | 120 | 6 |
| 6 | 150/ 6" | 47.5 | 17.6 | 3.2 | 10.2 | 2.4 | 140 | 6 |
| 8 | 200/ 8" | 60 | 22.4 | 3.2 | 11.7 | 2.4 | 210 | 6 |
Feature
- High-leverage geometry for lower hand effort
- Slim, tapered jaws for tight-access gripping and forming
- Induction-hardened side cutters for clean shearing on Cu/soft Fe wires
- Cross-hatched gripping faces hold terminals, clips, and small parts
- Hot-riveted joint for smooth action and minimal wobble
- PP/TPR non-slip handles; easy wipe-down finish
FAQ
- Hard/piano wire? Use a cutter rated for hardened steel.
- Live circuits? Not insulated—select VDE tools for energized work.
- Care: keep jaws clean; light oil on joint; don’t pry with cutters.
