PRODUCTS
Menu
1827 High-Leverage Linesman Plier
1827- High Leverage Linesman Plier- (Heavy Duty)
- 1827 High-Leverage Linesman Plier
- 1827 高倍力電工鉗
- 1827 高倍力电工钳
- 1827 Alicate Liniero de Alto Palanca
- 1827 Hochhebel-Elektrikerzange
- 1827 Pince d’Électricien à Haut Levier
- 1827 كماشة كهربائي عالية الرافعة
- 1827 คีมช่างไฟ แรงงัดสูง
Overview The 1827 is a high-leverage linesman plier for cutting, twisting, pulling, and gripping conductors and hardware. An extended handle and optimized pivot reduce effort; induction-hardened cutters and cross-hatched jaws deliver secure bite in shop and field service. - Handle Introduction- (Plier, Torque Wrench/ Wrench)
| 1827 | L mm/inch | L3 mm | W3 mm | W4 mm | T1 mm |  g |  Cutting mm |  pcs |
|---|---|---|---|---|---|---|---|---|
| 9 | 225/ 9" | 39.5 | 32 | 8 | 15.5 | 540 | 2.3  | 6 |
Feature
- High-leverage geometry – noticeably less effort vs. standard designs
- Induction-hardened cutters – clean shearing on Cu/soft Fe wires
- Cross-hatched flat jaws – strong grip on conductors and hardware
- Crimp/press zone (if equipped—confirm) for terminals/sleeves
- Fish-tape puller groove (if equipped—confirm) for jobsite routing
- Hot-riveted joint – smooth action, minimal wobble under load
- Non-slip PP/TPR handles – control in oily or wet conditions
Micro-FAQ
- Hard/piano wire? Use a cutter rated for hardened steel.
- Live electrical work? Not insulated—use VDE-rated tools for energized systems.
- Maintenance: keep joint lightly oiled; avoid prying with the cutting edge.
