PRODUCTS
Menu
3028-XZN Bit Socket (12 Point)- 3⁄8″”Drive
3028:3⁄8″Drive 12-Point XZN Bit Socket (Triple Square)
- Douilles tournevis para tornillos
- śrubokręt nasadowy
- Steckschlüssel-Schraubendreher
- Vasos destornilladores
- مفك البراغي
- ไขควงปากแบน
- DIN 2324/ 2325
- Up to HRC 60º Bit Driver Made by W/S2 Steel Material
- 3028/ 3028-5
- Understanding Bit Sockets: A Smart Combination of Power and Precision
| 3028 | 3028 L : mm | 3028  g | 3028-5 L : mm | 3028-5 g |  pcs |
|---|---|---|---|---|---|
| M3 | 48 | 50 | 120 | 62 | 10 |
| M4 | 48 | 50 | 120 | 62 | 10 |
| M5 | 48 | 50 | 120 | 62 | 10 |
| M6 | 48 | 50 | 120 | 62 | 10 |
| M7 | 48 | 52 | 120 | 70 | 10 |
| M8 | 48 | 52 | 120 | 70 | 10 |
| M9 | 48 | 54 | 120 | 80 | 10 |
| M10 | 48 | 54 | 120 | 80 | 10 |
| M11 | 50 | 54 | 120 | 80 | 10 |
| M12 | 50 | 56 | 120 | 90 | 10 |
Feature
Technical FAQ: 3028 XZN Bit Socket Optimization
- Is XZN the same as Torx? No. While they look similar, XZN has 12 flat-sided points (3 overlapping squares), whereas Torx has 6 rounded lobes. Using a Torx bit on an XZN bolt will immediately strip the fastener. Always use the 3028 for 12-point spline fasteners.
- Common Applications for 3/8″ XZN Sizes:
- M6: Oil pan and timing cover bolts.
- M8 & M10: Transmission bell housings, brake caliper brackets, and door hinges.
- M12: Axle bolts and some cylinder head applications.
- Can I use these with an Impact Wrench? No. The 3028 series are Hand Bit Sockets. For pneumatic or electric impact tools, please refer to the Hans Impact XZN (Cr-Mo) series to avoid bit failure.
- Maintenance: Periodically check the bit tip for wear or metal deformation. Keep the drive square clean of grit to ensure a secure lock with your ratchet.
